craigslist | tools in wenatchee

Burndy Dieless Hydraulic Crimper (Moses Lake) $1200

2008-11-18T21:35:52-08:00

For sale Near new Burndy crimper Crimps lugs and butt splices from #4 thru 1000MCM wire Call 509-431-0248 Steve

DUAL MIG 131 WELDER (Leavenworth) $175

2008-11-18T21:12:11-08:00

DUAL MIG 131 WELDER. Chicago Electric Welding System.
This can be used with flux core wire/gas or solid wire. This welder does not come with gas but is gas ready.
Runs on 110 volt 20amp service.
great for the backyard handyman or great for X-mas.

Limited Edition Jesse James Tool set 210 (omak) $550

2008-11-18T19:28:36-08:00

this is a mac tools limited edition jesse james west coast choppers tool box and tool set this new you can call at 509-885-8074

TWO 24 FOOT EXTENTION LADDERS STILL LIKE NEW FIBERGLASS (MOSES LAKE) $175

2008-11-18T16:08:03-08:00

I HAVE TWO 24 FOOT EXTENTION LADDERS ONE IS RED FIBERGLASS AND THE OTHER IS A ALUMINUM LADDER BOTH HAVE ONLY BEEN USED A COUPLE OF TIMES STILL LIKE NEW PLEASE CONTACT ME IF INTERESTED 5097503767 THANKS

Makita siding nailer an611 (East Wenatchee) $150

2008-11-18T11:08:09-08:00

Nice siding nailer works great comes with hard case.

Craftsman 30 gallon 6HP air compressor (Wenatchee) $180

2008-11-18T07:59:50-08:00

Craftsman 30 gallon, 6 HP, oil free, upright air compressor in like new conditon. I have some hoses / accessories I can throw in. Nice compressor, used very little. Call 387-6492

New! Still in package: 10" Carbide saw blades (Wenatchee) $25

2008-11-17T13:10:05-08:00

Still in the package. Two pack DeWalt 10" saw blades for your
tablesaw, or mitersaw. Great stocking stuffer for your favorite
woodworker. These retail on Amazon for $64.72 (but hey, Sears
once sold them for about $55 + tax). Why pay retail? Buy mine
for less than 1/2 price and no tax. Your woodworker will think
of you everytime they use them.

weinig knife stock (east wenatchee)

2008-11-17T10:52:36-08:00

weinig moulder knife stock ehg- new 10 pieces 5/16" x 1 3/4"-3" 125.00 each.
e-mail sureshot@charter.net

Ladders 20' and 4ft step ladder

2008-11-16T11:43:22-08:00

20 ft ladder with warner caps $70 and a 4 ft step ladder $35 both for $100

Call me

(509) 699 9073
will deliver in wenatchee area

2" TRASH/WATER PUMP-2 MONTHS OLD-USED LESS THAN 4X (EPHRATA) $150

2008-11-16T10:02:10-08:00

POWER EASE 6.5HP 2" WATER PUMP. GAS POWERED
CENTRIFUGAL DESIGN.

COMES WITH 40 FEET OF CLEAR SUCTION HOSE, 3 PIECES
(1) 20 FEET (2) 10 FEET.

CALL 206.227.1065

Foley Belsaw (Waterville) $550

2008-11-15T13:24:08-08:00

Are you retired "Bored" you need a hobby... Earn money in your free time with a (Foley/Belsaw) Sharp-all saw and tool grinder....New never used still in box. Paid $1,100 Sell for $550

contact Bill @(509)745-8623

Lincoln AC arc welder (Wenatchee) $125

2008-11-15T10:23:24-08:00

Lincoln 225Ac welder.In great shape,works fine.
Price $125.00 firm. Call 679-5722

Aluminum Diamond Plate Locking Toolbox (Manson, WA) $150

2008-11-14T21:24:42-08:00

For Full-Size pickup, excellent condition - no dents, no dings. Price does not include cost to ship if buyer cannot pick up.

Super Ryobi Combo Kit 12 tools ( 18 V ) ! ! ! (Wenatchee) $200

2008-11-13T21:32:06-08:00

Super Ryobi Combo Kit of 12 (18 V) tools, Include:

� Impact Driver
� Angle Drill
� Spiral Saw
� Reciprocating Saw and accessories
� Angle Grinder and accessories
� Lamp
� AM/FM Portable Radio
� 2 Speed Drill
� 3 ONE � Batteries
� Charger
This Kit is over $450.00 new and some of this tools are new. These helpful tools can be yours for only $200.00.

Only interested buyers please. Contact number (509) 881 70 80

Framing Tools (Wenatchee) $300

2008-11-13T21:11:22-08:00

Hitatchi Framing gun
Bosch WormDrive Skill saw with rafter hook
Dewault SawZall with 4-way blade insertion
Tool Bags with 19oz Vaughn hammer, stabila torpedo, swanson sq. 35ft fatmax, chalk line

all tools under a year old and have general wear and tear on them.
they are still in excellent working order.

im firm on the price.

1 ton pipe rack with tool boxes (wenatchee)

2008-11-13T17:59:21-08:00

the demensions are 7'3" wide, 7'10" long, and the cab extension is 4'8", built with 2"x1/8" steel square tubing, and it comes with two side tool boxes with demensions of 16"x 18"x 7'6" and each tool box has two doors on each side. it is in excellent condition, and it is set up for a 1 ton pickup

asking 1250 obo

Craftsman Air Compressor (East Wenatchee) $275

2008-11-13T16:51:59-08:00

Like new 6hp 33gal Craftsman electric air compressor $275.00 obo 509-860-3104

Tools (east wenatchee) $50

2008-11-12T21:16:11-08:00

im seleing a KOBALT Toll bag full of Tools you can reach me at 509-741-7239

Oxy/Acetylene Set (Wenatchee) $625

2008-11-12T10:18:27-08:00

I have an Oxy/Acetylene Set that I don't wanna sell really but do to tough times I need to let this unit go. Its the sizes down from the largest set, with full blown industrial VICTOR regulators and a homemade cart have multiple cutting torches and welding tips, striker. Ready to go, even full of gas, only used about an hour of gas, and I think its good for about 4 hours continous use. One new gauge and the hoses could be replaced in the near future but not necessary yet....Don't bother low balling me this is a firm price and like I said I don't really wanna sell it. This set is worth easily $1000 dollars, and you can't even get into a small set for under $750 without a cart...so good deal for someone. 630-7151 $625

12 volt cordless Drill set (wenatchee) $29

2008-11-12T06:54:12-08:00

i have real nice Drill set With 2 / 1 HOUR FAST CHARGE BATTERY. call Tony (509)421-0253

Chain Saw (Wenatchee) $500

2008-11-11T22:03:41-08:00

Husqvarna 61 Professional chain saw

Equivalent to today�s Husqvarna 570 Professional chain saw

This is a high-performance, powerful saw for demanding professional users. Equipped with a 20 inch solid bar with a roller bearing roller nose , it will easily handle a 24 inch bar. High torque over a very wide rpm range, productivity boosting features and lower fuel costs make this saw an excellent choice. This saw's rugged characteristics make it a superb clearing or felling saw. Used primarily as a firewood gathering saw it has seen five seasons use. In addition to the excellent Husqvarna vibration dampening system I have also installed gel foam bar pads to further isolate vibrations and make it easier to operate all day long with much less fatigue.

Easy to maintain
The operator�s manual describes how to maintain this saw in top operating condition. All basic maintenance can be handled using no more than three tools -- scrench, socket wrench, and a small flathead screwdriver; all are included.

BONUS! A Gam� carbide rotary bar sharpening system is used to maintain the chain in precise cutting condition. You can return your saw to original surgical sharpness and absolute precision with every tooth, in the field, with no electricity with ease. This will keep your chain sharp and cutting straight.

Proficiently maintained
When cleaned at end of the season I go through this saw in the finest detail, with maintenance at the highest levels. The bar, chain, piston, air filter, kill switch, have all been replaced at various times. A new spark plug is included as a backup.

Extras:
A bar scabbard, gallon and a half of chain oil, several containers of mix oil, a lithium grease gear lubricating tool for lubricating the bar roller nose bearings are all included.

$500.00

Call 509-664-1933 for directions or more information.

Bostich Coiler Framing gun (wenatchee) $75

2008-11-11T19:07:30-08:00

Bostich Coiler Framing gun, works good, costed over $300 new. 630-7151

front/rear Bumper Jack air/hydraulic 3-Ton (Leavenworth) $400

2008-11-11T16:34:19-08:00

The easy way to pick up chicks...I have a good working bumper jack that is rated to lift 6000 pounds. It was built to raise the front or rear half of your vehicle. It's on wheels for portability. Operates on air yes, free air. You'll need the air to be compressed so for an extra $200 I'll sell you my air compressor(but only if you buy the bumper jack). This is the Bishman Model 415 and if I had more space I'd keep it. Hurry this won't last long and cash talks. I can be contacted through email or occasionally I answer the phone ask for GM Jim 509 548-7612 ext."0" Hey this is America and everything is negotiable. Trades considered

McCulloch Generator (Cashmere) $200

2008-11-11T10:19:44-08:00

Looks used, has some rust but runs great, Mac Power 2300E generator. Asking 200.00

Drill Press (East Wenatchee) $50

2008-11-11T09:31:44-08:00

large drill press in working condition

Craftsman Mower (wenatchee) $50

2008-11-10T09:10:37-08:00

It worked all summer and now it wont start. I am sure it wont take much to fix.
willing to trade..... give me a call 509-393-9898

Generator (Ellensburg) $350

2008-11-10T09:04:43-08:00

Gas powered, 4400 Watt, 8hp. Like new, runs great. Call Bruce @ 509-304-8626 or respond to e-mail.

chain fall + trolly $200 (leavenworth) $200

2008-11-09T19:46:09-08:00

heavy comerical chain fall for and trolly for low overhead clearence
$200 O.B.O.

Craftsman miter saw 10in (wen) $90

2008-11-09T18:09:15-08:00

Craftsman miter saw 10in. with table with foldable adjustable legs, with rollers that spread wide for boards. don't have a picture with the table right now. $90 630-7151

cordless drill set (wenatchee) $29

2008-11-09T17:21:19-08:00

i have a rel nice cordless drill set. call tony (509)421-0253

20" Tile cutter (Chelan) $10

2008-11-09T08:08:23-08:00

I have a 20" Tile Cutter which is described by the following pictures. The Cutter is setting on its packing box.

My phone 509 682 5328 or 425 359 2983

Craftsman Band Saw (East Wenatchee) $65

2008-11-08T15:20:59-08:00

Craftsman 10" band Saw. $65. 509-387-0052

Table Saw (East Wenatchee) $75

2008-11-08T15:15:50-08:00

10" Table Saw with attachments, 120V 13amps. $75.00 509-387-0052

I have a Dewalt 12" Compound Mitre Saw & Stand - Excellent Condition (Moses Lake) $350

2008-11-08T12:14:40-08:00

Reply with any questions. Asking $350 or best offer.

Portable Air Compressor (Wenatchee) $80

2008-11-08T09:05:25-08:00

2 HP portable air compressor with 5 gallon double tank. 120 volt, Central Pneumatic, with 50' hose & tire inflator. Four years old, little used, excellent condition. (509) 884-4073

Dado set (509/782/7043) $25

2008-11-07T17:57:51-08:00

6in. dado head set 1/2 in.center.

Powermatic Model 13 (Wenatchee) $750

2008-11-07T14:32:23-08:00

Powermatic Model 13
6 inch Edge Sander

Selling edge sander in like new condition. Included is a mobile base this sander in now being sold under the Jet Brand for $1,128.00 on Amazon with no base. Base sells for $69.00 If interested please email me or contact me at (509) 741 000

Oscillating spindle sander (Wenatchee) $475

2008-11-07T14:31:53-08:00

Grizzly Model G1071
Oscillating spindle sander

For sale like new spindle sander with ShopFox mobilebase. This sander is on sale now at grizzly for $595.00 for the sander, and the mobile base. model G8683 $59.00 I have the manual. If interested email me through CL or call me at (509)741-0000

Big Boy 80 Edge Sander (Wenatchee) $400

2008-11-07T14:30:24-08:00

Big Boy 80 Edge Sander
This sander is a knock off of the Powermatic 13, which is being sold under the Jet Brand. This sander has the ((OPEN STAND)) but other than that looks and works just like the powermatic As you can see thay are like twins. If interested please email me through CL or call at (509)741-0007

oscillating spindle sander (Wenatchee) $300

2008-11-07T14:29:37-08:00

Powermatic Model 14
oscillating spindle sander

This sander is in like new condition and come with lots of abrasive sleeves, has several sizes of spindles and Throat plates. This sander is now being sold under the Jet brand, JBOS.5 for $475.00 at Amazon. all parts interchange. If interested please email me through CL or call me at (509) 7410007

28" snowblower (Chimacum) $600

2008-11-06T20:40:10-08:00

28" snowblower, 6.5 HP, 4-cycle enginer, brand new.

$600 each (Clearance!!) I can deliver to your area.

Call Jim at (360) 732-4257 or (425) 299-3994.

5000 watt generator (wenatchee) $300

2008-11-06T19:05:27-08:00

5000 watt 10 hp gasoline generator , for construction use, great condition, used for one job. call or email 509-264-1442

Misc. tools (Cashmere) $100

2008-11-06T12:51:59-08:00

$ 40 - Hilti framing nail gun
$ 20 - 4 foot level
$ 20 - Makita 3/8 drill
$ 35 - Shop Vac, 20 gal, 6 1/2 HP

Sold individually or $100 for everything listed above. Also for sale temporary power pole with 2 - 110 outets & 100 amp breaker for $100 and 8 ft. 3-legged step ladder for $50.

Drill (Cashmere) $25

2008-11-06T12:10:46-08:00

Makita 3/8 drill

less expensive table saw (Leavenworth) $100

2008-11-06T12:09:26-08:00

Need the space so this Craftsman 10-inch table saw must go. Runs fine and can be delivered. It is belt driven and the large electric motor can be used to power other tools(grinders, etc.) $100.00 cash or will consider trades(gold and silver jewelry preferred). E-mail or leave a message at 509 548-7612 GM Jim

Level (Cashmere) $20

2008-11-06T12:08:31-08:00

4 foot level

Step ladder (Cashmere) $50

2008-11-06T12:02:57-08:00

8 ft wooden 3-legged step ladder

Automotive Paint Spray Gun & Supplies (Cashmere) $150

2008-11-06T11:58:59-08:00

Paid over $200 within the last year for the spray gun, used only a few times. Have some extra supplies to go with it.

Temporary power pole (Cashmere) $100

2008-11-06T11:54:05-08:00

2 - 110 outlets, 100 amp breaker

Nail gun (Cashmere) $40

2008-11-06T11:45:42-08:00

Hilti Framing nail gun

Table Saw (Wenatchee) $250

2008-11-05T20:40:11-08:00

This is a like new RYOBI BT3000 10 inch 2 HP table saw. Includes stand and accesories. $300 OBO. Call Les @ 662-7959

Ideal 1/2" Conduit Bender #74-001 & 38" handle #74-019 (East Wenatchee) $30

2008-11-05T16:47:18-08:00

BOTH OF THESE ITEMS ARE FROM MY FATHERS ESTATE/BUSINESS AND WERE USED LITTLE IF AT ALL. I LISTED AS USED SINCE THEY WERE NOT IN ORIGINAL PACKAGING, HOWEVER I CONSIDER THEM IN NEAR PERFECT CONDITION WITH STORAGE "SCUFF'S". $30.00 O.B.O. 509-670-5618

0NE (1) IDEAL #74-001 DUCTILE IRON 1/2" CONDUIT BENDER.

ONE (1) IDEAL #74-018 3/4" BY 38" LONG HANDLE.

NEW PRICES RANGE $39 - $48 FOR THE HEAD AND $30 - $38 FOR THE HANDLE.

Dunlap Electric Motor (Moses Lake) $10

2008-11-04T10:34:51-08:00

Great running 1/3 horse motor. Has on/off switch.

senco cordless drywall screw gun (wenatchee ) $125

2008-11-03T19:24:44-08:00

hardly used maybe 5 or 6 times $125 obo 509-881-1111

Radial Arm Saw (Entiat) $175

2008-11-03T12:59:18-08:00

Craftsman 10" 2.5 HP Radial Arm saw with stand. Good condition, works great.

6250 Watt Generac Generator (East Wenatchee) $350

2008-10-29T21:41:10-07:00

6250 Watt Generac Generator. Runs good. Used very little. Has extra quiet muffler. Large gas tank. 10 hp Tecumseh engine. Manual included. (509)293-2878

Coleman 18 volt cordless combo tool set (East Wenatchee) $75

2008-10-29T21:36:49-07:00

Coleman 18 volt cordless combo tool set. Includes 2 batteries, charger, drill, saber saw, flashlight, and sander. Barely used. Everything works great. (509)293-2878

Senco FinishPro 41XP Finish Nailer (Ephrata) $75

2008-10-29T19:55:52-07:00

Like new works great. 509-398-6460

Bose 1590 EVS Jigsaw (Ephrata) $50

2008-10-29T19:52:14-07:00

Used works great Bose 1590 EVS Jigsaw.398-6460

Scaffolding (Chelan) $150

2008-10-29T16:56:13-07:00

509 670 5656 4 stages 3 planks....

Rockwell Variable Speed Drill Press on Stand (Cashmere) $60

2008-10-29T09:10:19-07:00

For sale is this Rockwell Varible speed drill press on stand.this drill press has a 1/2" chuck and 1/3 Hp. asking 60.00 or best offer! Please call Michael at 509-264-7121.

Battery Charger, large capacity with starter boost (East Wenatchee) $60

2008-10-28T20:08:33-07:00

Battery Charger, large capacity with starter boost. Asking $60.00
call Dan 509-860-6620

Spraytech 419 airless sprayer with Graco 2 finger contractor gun (Leavenworth) $400

2008-10-28T16:53:46-07:00

Only used 3 times, approximately 30 gallons. Painting was a temporary business for me and now I'm transitioning into a new career. Call me at 509-860-5073 $400obo

Werner Ladders 32ft aluminum & 24ft fiberglass (Leavenworth) $300

2008-10-28T16:52:34-07:00

Painting was a temporary business for me and now I'm transitioning into a new career so having ladders this size isn't necessary. I will also sell these separately. Call me at 509-860-5073 $300

Weatherguard R-117 Aluminum Truck ToolBox (Chelan) $275

2008-10-26T10:53:33-07:00

Weatherguard R-117 Aluminum Truck Box

This is by far one of the best and biggest saddle boxes available. Box is used and in good condition. No major issues or defects (gas struts are starting to get a little weak). Asking $275 OBO. Lock sets were just upgraded to the new style cylinders (2 keys included).
Contact Todd: (509) 682-8702 or schip@nwi.net

Weatherguard 117 Specifications:
� Height: 18-3/8"
� Width: 28"
� Length: 71-3/8"
� Fits: All full-size pickups with 8-foot beds
� Fits: '99 and newer Chevy Silverado/GMC Sierra and Ford F-150 6 1/2-foot beds
� Included: Powder coated steel divider tray and two keys

Weatherguard 117 Features:
� ONE-TOUCH latch mechanism and trademarked RED PUSHBUTTON on both ends of the box allows for one-handed opening of the box from either side of the truck.
� Low profile box suspends from the side of a pickup truck allowing plenty of room underneath.
� Single cover style is designed to conceal the full-length stainless steel piano hinge and provides easy access for larger bulkier items.

Want to Buy Bench Grinder, others (wenatchee)

2008-10-24T16:33:30-07:00

I'm looking for a bench grinder and a small portable eletric heater and some hand carving tools, also want a freezer and a garden 4 wheel type cart... if you any of these items give me a call 509-630-5064 Daniel Ok and thank You!

Refrigerant Recovery System (East Wenatchee) $70

2008-10-23T18:23:42-07:00

Refrigerant Recovery System works well. AMPROBE/PROMAX RG3305. Includes Users Guide. In good operating condition. Asking $70.00
Call Dan 509-860-6620.

Shop Smith Mach V Home Workshop System, Used, 1989 (Lake Wenatchee) $500

2008-10-23T11:46:00-07:00

This is a used Shop Smith Mark V from about 1989. It belonged to my father who used it as a hobby machine. Although we had good intentions, we have never had the Shop Smith together, but do have parts and owners manual. 509 763-1113

Radial Arm Saw (East Wenatchee) $50

2008-10-22T22:39:17-07:00

10" 2.5HP Sears Craftsman radial arm saw mounted on table.
Good condition call Ron 630-2929

Air Compressor (E.Wenatchee) $700

2008-10-22T17:56:18-07:00

Campbell Hausfeld gas two stage air compressor, 8 hp Kohler engine 14.7 gfm 4T, 90 psi, 30 gallon ASME mounted on 13 inch tires. $700.00 obo. Used little.
Call (509)886-0208

band saw -16 inch (leavenworth) $325

2008-10-22T10:17:44-07:00

PRICE REDUCED

16" BAND SAW, MODEL G1538 GRIZZLY
USED ONLY IN PERSONAL SHOP, NICE CONDITION

Husqvarna 141 chainsaw runs good (omak) $125

2008-10-22T07:15:15-07:00

this is a good running saw it is uesd and has lots of life left on it also hac=ve a stihl 031 chainsaw needs some work $50

Dewalt Miter Saw Almost new (East Wenatchee) $700

2008-10-20T15:35:04-07:00

This saw has only been used 3 times to cut trim, it is in excellent shape and we also bought extention arms for it also. We need to sell a.s.a.p. will consider offers Paid 1000. at home depot a year ago Model # dw718
Call colleen 860-6625

40 lbs of 6p.TWIST NAILS-NEW (Lake Wenatchee) $25

2008-10-20T08:01:18-07:00

40 pound box of new twist nails, 6p.
50 lb box retails for $75.00, selling 40 pounds for $25.00.
E-mail or phone 509-763-3350

10" Craftsman Radial Arm Saw (East Wenatchee) $200

2008-10-19T19:57:04-07:00

10" Craftsman Radial Arm Saw. Approximately 15 years old. Has dust collector and 3 drawer stand w/wheels. Moulding set, lots of extra blades, drill chuck and sanding disk. $200 (509)293-2878

wood turning tools (wenatchee) $90

2008-10-19T11:59:15-07:00

almost new great neck 8 pc set wood turning tools.

stihl 031 chainsaw fix or for parts (omak) $65

2008-10-19T09:03:05-07:00

i have a 031 stihl chain saw had it running needs a air filter and a cover for the air filter need the rewind fixed has bar and chain with it $65

Husqvarna 141 chainsaw runs good (omak) $150

2008-10-19T08:49:03-07:00

i have a husky chainsaw it is used but has lots of life left in it